An exclusive combination of equipment that combines high performance and competitiveness to overcome the challenges of Industry 4.0
At Altus, we have the necessary know-how to provide integrated systems for the most varied demands of the industrial market
Discover our solutions and discover how our expertise can help boost your business performance
See how we have become a reference in the automation market over the course of our more than 40 years
We are 100% available to solve problems, answer questions and help you optimize the performance of your application.
Get to know our units and find out where to find our sales representatives throughout Brazil
The NX4000 module allows I/O modules to be easily distributed in the field, and can be used both as local I/O points (located next to the CPU module) and as remote points, without any loss of performance.
02 10/100 Mbps Ethernet Interfaces
Key for selecting rack address
Support for bus expansion with loopback (cabling redundancy)
Support for bus expansion module redundancy
One Touch Diag
Electronic Tag on Display
Display for diagnostic indication
MasterTool IEC XE is a complete tool for programming, debugging, configuring, and simulating user applications. The software is based on the integrated tool concept, providing flexibility and ease of use, allowing users to program in six languages defined by the IEC 61131-3 standard.
Module with 16 isolated source/sink inputs for general use.
The NX1005 is a hybrid module that offers 8 protected digital outputs (source type) and 8 isolated digital inputs (source/sink type) for general use. The NX1005 occupies only one rack position in the Nexto Series and features exclusive characteristics such as Electronic Tag on Display, Easy Plug System, and One Touch Diag.
The NX1006 module offers 8 monitored sink-type digital inputs, occupying only one slot on the rack. These modules are used in fire detection and security systems, and are suitable for applications where a broken loop/line situation needs to be detected, that is, for continuous monitoring of the connection between the module and the field sensor.
Module with 16 protected power supply outputs for general use.
Module with 16 protected relay outputs, power supply type, for general use.
The NX2025 module offers 8 monitored digital transistor source outputs, occupying only one rack position. These modules are recommended for applications where electrical installation monitoring is necessary, indicating conditions of no load, broken wiring, short circuit or overcurrent, and have diagnostic functions to ensure the outputs are working.
With a response time of 4 ms per cycle, the NX3003 positions itself as the best-performing solution for the machinery market. The module has four high-speed inputs for encoder reading (unidirectional, bidirectional, and quadrature) and four high-speed outputs for stepper motor control (PTO/PWM).
With high processing speed and ample data storage capacity, the NX3004 CPU is suitable for small machines and systems that do not require a highly complex automation structure.
In addition to high processing speed (1000 contacts every 6 microseconds) and ample data storage capacity, the NX3005 CPU also features WebServer support, making it a cost-effective option for the demands of the sanitation, building automation, and general industrial sectors.
With high-speed processing, ample data storage capacity, bus expansion for up to 24 racks, and advanced real-time diagnostics, this is the most robust processing unit in the NX Series.
The robustness and high performance of the 32-bit Power PC RISC processor make the NX3010 an ideal CPU for large machines and small to medium-sized systems.
With high processing capacity, bus expansion for up to 24 racks, and advanced real-time diagnostics, the NX3020 CPU is ideal for medium and large automation systems.
With high-speed processing, ample data storage capacity, bus expansion for up to 24 racks, and advanced real-time diagnostics, the most robust processing unit in the series also offers redundancy support.
The robustness and high performance of the 64-bit processor make the NX3035 an ideal CPU for systems that demand high processing power and high availability.
The NX4010 module is used for redundant applications in half-clusters, where high availability of the automation system is required. It is responsible for connecting the two half-clusters.
Ethernet module for applications requiring more Ethernet interfaces than those provided by Nexto CPUs, or in applications where high availability of the automation system is required through the use of network redundancy.
PROFIBUS-DP master module for use with Nexto Series CPUs. This module allows access to up to 3584 bytes of input and 3584 bytes of output, as well as redundancy support for applications where high availability is expected.
A head-slave type device for MODBUS TCP networks, allowing the user to utilize all input and output modules of the Nexto Series.
Head-slave device for MODBUS TCP networks with integrated input and output interfaces, allowing the user to use all input and output modules of the Nexto Series.
Slave-head type devices for PROFIBUS-DP networks, enabling the user to utilize all I/O modules of the Nexto Series.
Slave-head type devices for PROFIBUS-DP networks, enabling the user to utilize all I/O modules of the Nexto Series.
Module with eight analog inputs that can be individually configured as voltage or current inputs. The product also provides different scales for both voltage and current inputs.
Module with eight analog thermocouple inputs that can be individually configured for different thermocouple types. The product also provides different temperature scales in Celsius or Fahrenheit.
Module with eight individually configurable analog current inputs with HART. In addition to enabling the reading of signals from field instruments via the conventional 0-20 mA signal, these inputs also allow HART communication with instruments through the CPU's Ethernet port using an asset management tool that supports DTM technology.
Module with eight individually configurable analog inputs for reading RTD (Resistance Temperature Detector) type temperature sensors. The module allows the use of temperature scales in degrees Celsius or Fahrenheit and parameterizable filters that assist in the implementation of systems for industrial automation and process control.
Module with four analog outputs that can be individually configured as voltage or current output. This module also provides different scales for both voltage and current outputs.
Module with four individually configurable analog current outputs with HART. In addition to enabling control of field actuators via the conventional 0-20mA signal, these outputs also allow HART communication with instruments through the CPU's Ethernet port using an asset management tool that supports DTM technology.
Power supply with up to 30 W of power, supplied to the other modules through the racks. The module has an isolated 24 Vdc input with an internal protection fuse accessible through the side cover of the module.
The NX9000 (8-position rack) is the perfect choice for applications with few or no local I/O points.
The NX9001 (12-position rack) is a great solution for applications with few I/O points.
The NX9002 (16-position rack) is an excellent choice for applications with a higher density of I/O points.
The NX9003 (24-position rack) is the ideal choice for large applications and systems that require a higher density of I/O points.
The NX9010 (8-position rack without hot change) is a suitable solution for machine applications.
The NX9020 (2-position panel mount base) is a suitable solution for applications that do not require I/O modules.
The NX9100 is a pair of side covers for the frame, designed to protect the frame's edges. This accessory is available for separate purchase.
The NX9102 is a connector cover for unused positions in Nexto Series racks. This cover was specially developed to provide high protection to unused rack connectors.
CAT5 Ethernet communication cable, 2 meters long, equipped with RJ45 male connectors at both ends.
CAT5 Ethernet communication cable, 5 meters long, with RJ45 male connectors on both ends.
Ethernet CAT5 communication cable, 10 meters long, with RJ45 male connectors on both ends.
Connectors used in the Nexto Series input and output modules are designed to facilitate installation, maintenance, and replacement of the modules.
Connectors used in the Nexto Series input and output modules are designed to facilitate installation, maintenance, and replacement of the modules.
Connectors used in the Nexto Series input and output modules are designed to facilitate installation, maintenance, and replacement of the modules.
Connectors used in the Nexto Series input and output modules are designed to facilitate installation, maintenance, and replacement of the modules.
Connectors used in the Nexto Series input and output modules are designed to facilitate installation, maintenance, and replacement of the modules.
Connectors used in the Nexto Series input and output modules are designed to facilitate installation, maintenance, and replacement of the modules.
Connectors used in the Nexto Series input and output modules are designed to facilitate installation, maintenance, and replacement of the modules.
Nenhum produto encontrado.
© 2026 Altus
Criação de sites pela Agência de Marketing Digital Orgânica Digital.
